TOSHIBA E STUDIO 160 PRINTER DRIVERS

Page 31 Set the desired copy modes. Page 91 Misfeed in duplexer Remove any misfeed paper from copier. Page To prevent electrostatic destruction, do not touch the connector pin when plugging or unplugging the connector. Remove any misfed originals. When the Finisher is attached, this mode cannot be selected.

Uploader: Gomi
Date Added: 11 August 2016
File Size: 58.3 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 62541
Price: Free* [*Free Regsitration Required]

Page 63 Press the key to select the desired paper cassette.

After that, you must open the front cover, and then remove the toner cartridge. Press the lever 1 and pull up the staple guide knob 2. Fuser front cover Knob Fig. If you continue without changing your cookie settings, we’ll assume that you are happy to receive all cookies on our website.

Toshiba E STUDIO E STUDIO Supplies and E STUDIO Parts

Confirm proper operation of the stapler. This printer does not just print documents, it brings them to life, as your documents and photos will have a professional impact on your audience due to its bold colours and clean, crisp fonts.

PWA toahiba generates DC power. Staple kit option Use this procedure to remove jammed staples. Release 2 clamps and detach the connector. toshiba e studio 160 printer

Toshiba e-studio 160 Operator’s Manual For Copying Functions

Page This thermistor controls the temperature so that the heat lamp turns OFF when either of the values detected by the thermistor 1 or thermistor 2 exceeds the tem- perature setting. Page 54 Separation Rotation of drum chager jamming up the cleaner, a separation claw me- chanically separates any copy paper which fails to be separated. Screw Connector Fig. Page 35 Precautions for Using the Automatic Document Feeder optional or the Reversing Automatic Document Feeder optional Do not use the following types of originals as they toshiba e studio 160 printer to be misfeed or become damaged: Automatic Test Mode 8.

Loosen the two blue screws fixing the fuser cover and open the fuser cover by holding the blue felt part.

For these types of originals, use the manual paper selection. Place paper in the cassette. With digital multi function system ptinter on, insert a sheet of paper into the stapler several times to advance the staples into position.

If a Finisher MJ is attached to the copier, Carriage 1 detach the finisher plate. When pages printed, toshiba e studio 160 printer end is determined Toner empty Open front cover. Calling For Service 7.

Also, if any of fuser thermostat 0. It is possible that the toner may have become caked in the replacement Toner Wtudio.

Page The driving force of the main motor is transmitted to the clutch through each gear of the tohiba drive gear assembly.

For the subsequent originals, repeat step 8 above. After conversion by the CCD, the electrical signals are amplified. Page 91 Misfeed in duplexer Remove any misfeed paper from copier.

The drum is ready for the next copy.

Don’t have an account? Press the cartridge knob to remove the empty staple case. For the setting procedures, refer to section 1. Manual Paper Selection Highly transparent d such as OHP films and tracing paper, very dark originals, originals with dark borders, or non-regular sized originals such as newspaper toshiba e studio 160 printer magazines, may be incapable of automatic paper selection.

‘ + lbl_show_all_supplies + ‘:

Blink Toner empty Replace toner cartridge. Page For that reason, the laser scanner unit cannot be disassembled or adjusted in the field. Outline Of The Machine 2.